L298N Dual H-Bridge Driver
Drive 2 DC motors or 1 stepper — up to 2A per channel
IoT Kits
In StockLM2596 Buck Converter
PWR-LM2596 · Stock: 300
☆☆☆☆☆
No reviews yet — be the first
₹165
₹290
incl. GST
[Arduino] [ESP32] [Raspberry Pi]
Reliable LM2596 DC-DC buck module for powering robots and microcontroller projects from battery packs. Screw terminals, onboard potentiometer, LED indicator.
3 clicks: Buy Now → Checkout → Place Order
Adjustable 3A step-down — 4.5-40V in to 1.25-37V out
High-res visual shown left · QA bench-tested before dispatch.
| Input Voltage | 4.5-40V |
|---|---|
| Output Voltage | 1.25-37V adjustable |
| Max Current | 3A (2A continuous) |
| Efficiency | up to 92% |
| Dimensions | 43 × 21 × 14 mm |
| Weight | 12g |
IN+
Battery +
IN-
Battery −
OUT+
Load +
OUT-
Load −
Wiring guide: power rails first (VCC/GND), then bus (I2C/SPI), then interrupt/PWM lines.
// No code — power module // Tip: measure Vout with multimeter before connecting MCU
# No code — power module # Always verify output voltage before connecting sensitive boards
// No code — power module // Tip: measure Vout with multimeter before connecting MCU
Technical datasheet for PWR-LM2596.
A4988 Stepper Driver
Microstepping stepper driver — up to 1/16 step
Community signal
Ratings & Reviews
Real maker feedback for LM2596 Buck Converter.
—
No reviews yet — be the first
No public reviews yet
Share a wiring tip, build note, or bench-test result to help the next maker.